The Swingup Radar mount was replaced with a NavPod pod and what I believe is an Edson tube mount. This was done by the previous owner.
Bill Martinelli, Voyager, #11
(Click on picture for full size)
The Swingup Radar mount was replaced with a NavPod pod and what I believe is an Edson tube mount. This was done by the previous owner.
I removed the chart plotter from the navigation table and placed it below the radar using parts of the original aluminum mount and a couple of life ring box mounts.
The small white object on the back of the pod is a bimini light I purchased from West Marine to light the cockpit table. I placed some aluminum tape inside the upper area of the light to block the light from going out the top and aims it down at the table area. I've also placed two of these units on our dodger rails to light the cockpit area. these lights are 12 volts and need to be wired into the battery system.
Our wind indicator was removed from the front of the table and placed back by the radar along with our Master View ST80, hence the inclinometer filling the space.